Metal laser cutting machine is how to achieve the stainless steel with film cutting?

Now Metal Laser cutting machine has been more and more applied to the metal processing industry, is gradually replacing the traditional processing methods, such as shearing plate, flame, punch, CNC and so on. Because laser cutting machine is a new type of processing equipment, so not all accepted by the industry, there are several reasons: 

1, for some industries, the existing machine can meet the production demand, so the metal laser cutting machine did not go deep understanding, so not familiar with. 

2, relative to the traditional machine, price factor is one of them, metal laser cutting machine price than the traditional machine much more expensive. 

3, the main point is, metal laser cutting machine is good to use after all, can increase how much work efficiency? 

This is a matter of concern to everyone. Then we from the working principle of metal laser cutting machine to see why the laser cutting machine is good, why can greatly increase work efficiency.

The key of the metal laser cutting machine is the laser processing technology. The precision laser processing technology of the laser cutting machine can process many kinds of workpieces, because it doesn't need to contact with the cutting workpieces directly when cutting, so the metal laser cutting machine generated high-energy laser beam can be free to move, so that the surface of the workpiece being cut evenly heated, cutting up the precision is very high; And precision laser processing technology can cut a lot of workpiece materials.

Through the analysis, we can see that the metal laser cutting machine can greatly increase the work efficiency, good or bad use you are still struggling with it?

In cutting wire drawing or mirror stainless steel, the general need to use the film cutting technology. Because the wavelength of the fiber laser is relatively short, only 1.06 um, it is difficult to be absorbed by non-metallic materials. When cutting the stainless steel film, bad phenomena such as anti-slag, anti-penetration, high anti-alarm, etc. Often appear, it has a great influence on the cutting quality and normal production of sheet metal. In order to make the surface of the film melt, we need to rely on the laser reflection heat on the steel plate to achieve, small power can not cut through the film; large power is easy to damage the surface of the plate; a cut is very unstable; surface coating is very easy, it's blown up. Obviously, with the traditional CO2 laser cutting technology is unable to realize the sticking film stainless steel cutting processing.